74ABT823 Datasheet, PDF (1/17 Pages) NXP Semiconductors – 9-bit D-type flip-flop with reset and enable 3-State

74ABT823
9-bit D-type flip-flop with reset and enable; 3-state
Rev. 03 — 23 March 2010
Product data sheet
1. General description
The 74ABT823 high-performance BiCMOS device combines low static and dynamic
power dissipation with high speed and high output drive.
The 74ABT823 is a 9-bit wide buffered register with clock enable input (CE) and master
reset input (MR) which are ideal for parity bus interfacing in systems using many
microprocessors.
The 74ABT823 is designed to eliminate the extra packages required to buffer existing
registers and provide extra data width for wider data and address paths of buses carrying
parity.
The register is fully edge-triggered. The state of each D input, one set-up time before the
LOW-to-HIGH clock transition, is transferred to the corresponding output Q of the flip-flop.
2. Features and benefits
„ High-speed parallel registers with positive edge-triggered D-type flip-flops
„ Ideal where high speed, light loading, or increased fan-in are required with MOS
microprocessors
„ Output capability: +64 mA and −32 mA
„ Power-on 3-state
„ Power-on reset
„ Latch-up protection exceeds 500 mA per JESD78B class II level A
„ ESD protection:
‹ HBM JESD22-A114F exceeds 2000 V
‹ MM JESD22-A115-A exceeds 200 V
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name
74ABT823D −40 °C to +85 °C SO24
74ABT823DB −40 °C to +85 °C SSOP24
74ABT823PW −40 °C to +85 °C TSSOP24
Description
plastic small outline package; 24 leads;
body width 7.5 mm
plastic shrink small outline package; 24 leads;
body width 5.3 mm
plastic thin shrink small outline package; 24 leads;
body width 4.4 mm
Version
SOT137-1
SOT340-1
SOT355-1