M25P64 Datasheet, PDF (39/50 Pages) STMicroelectronics – 64 Mbit, Low Voltage, Serial Flash Memory With 50MHz SPI Bus Interface

M25P64
8
Initial delivery state
Initial delivery state
The device is delivered with the memory array erased: all bits are set to 1 (each byte
contains FFh). The Status Register contains 00h (all Status Register bits are 0).
9
Maximum rating
Stressing the device outside the ratings listed in Table 9 may cause permanent damage to
the device. These are stress ratings only, and operation of the device at these, or any other
conditions outside those indicated in the Operating sections of this specification, is not
implied. Exposure to Absolute Maximum Rating conditions for extended periods may affect
device reliability. Refer also to the Numonyx SURE Program and other relevant quality
documents.
Table 9. Absolute maximum ratings
Symbol
Parameter
Min. Max.
T_STG
T_LEAD
V_IO
Storage Temperature
Lead Temperature during Soldering
Input and Output Voltage (with respect to Ground)
–65 150
See note ⁽¹⁾
–0.5
V_CC +
0.6
V_CC
V_PP
V_ESD
Supply Voltage
Fast Program/Erase Voltage
Electrostatic Discharge Voltage (Human Body model) ⁽²⁾
–0.2
–0.2
–2000
4.0
10.0
2000
1. Compliant with JEDEC Std J-STD-020C (for small body, Sn-Pb or Pb assembly), the Numonyx
ECOPACK^® 7191395 specification, and the European directive on Restrictions on Hazardous
Substances (RoHS) 2002/95/EU
2. JEDEC Std JESD22-A114A (C1=100 pF, R1 = 1500 Ω, R2 = 500 Ω).
Unit
°C
°C
V
V
V
V
39/50