M29W160FT Datasheet, PDF (1/57 Pages) Numonyx B.V – 16 Mbit or 32 Mbit (x 8 or x 16, boot block) 3 V supply Flash memory

M29W160FT M29W160FB
M29W320FT M29W320FB
16 Mbit or 32 Mbit (x 8 or x 16, boot block)
3 V supply Flash memory
Features
■ Supply voltage
– V_CC = 2.5 V to 3.6 V (access time: 80 ns) or
2.7 to 3.6 V (access time: 70 ns) for
Program, Erase and Read
– V_PP = 12 V for Fast Program (optional,
available in the M29W320FT/B only)
■ Access time: 70, 80 ns
■ Programming time
– 10 µs per byte/word typical
■ Memory organization:
– M29W160FT/B: 35 blocks including 1 boot
block (top or bottom location), 2 parameter
blocks and 32 main blocks
– M29W320FT: 67 blocks including 1 boot
block (top or bottom location), 2 parameter
blocks and 64 main blocks
■ Program/Erase controller
– Embedded byte/word program algorithms
■ Erase Suspend and Resume modes
– Read and Program another block during
Erase Suspend
■ Unlock Bypass Program command
– Faster production/batch programming
■ V_PP/WP pin for Fast program and Write Protect
(available in the M29W320FT/B only)
■ Temporary block unprotection mode
■ Common Flash interface
– 64 bit security code
■ Low power consumption
– Standby and Automatic Standby
■ 100,000 Program/Erase cycles per block
TSOP48 (N)
12 x 20 mm
FBGA
TFBGA48 (ZA)
6 x 8 mm
■ Electronic signature
– Manufacturer code: 0020h
– Top device codes
M29W160FT: 22C4h
M29W320FT: 22CAh
– Bottom device codes
M29W160FB: 2249h
M29W320FB: 22CBh
■ Automotive device grade 3:
– Temperature: –40 to 125 °C
– Automotive grade certified
■ TSOP48 package is ECOPACK®
March 2008
Rev 3
1/57
www.numonyx.com
1