|
M25PX64-VMF6TP Datasheet, PDF (1/70 Pages) Numonyx B.V – 64-Mbit, dual I/O, 4-Kbyte subsector erase, serial flash memory with 75 MHz SPI bus interface | |||
|
M25PX64
64-Mbit, dual I/O, 4-Kbyte subsector erase,
serial flash memory with 75 MHz SPI bus interface
Features
 SPI bus compatible serial interface
 75 MHz (maximum) clock frequency
 2.7 V to 3.6 V single supply voltage
 Dual input/output instructions resulting in an
equivalent clock frequency of 150 MHz:
â Dual output fast read instruction
â Dual input fast program instruction
 Whole memory continuously read by sending
once a fast read or a dual output fast read
instruction and an address
 64 Mbit Flash memory
â Uniform 4-Kbyte subsectors
â Uniform 64-Kbyte sectors
 Additional 64-byte user-lockable, one-time
programmable (OTP) area
 Erase capability
â Subsector (4-Kbyte) granularity
â Sector (64-Kbyte) granularity
â Bulk erase (64 Mbits) in 68 s (typical)
 Write protections
â Software write protection applicable to
every 64-Kbyte sector (volatile lock bit)
â Hardware write protection: protected area
size defined by three non-volatile bits (BP0,
BP1 and BP2)
 Deep power-down mode: 5 μA (typical)
 Electronic signature
â JEDEC standard two-byte signature
(7117h)
â Unique ID code (UID) with 16 bytes read-
only, available upon customer request
 More than 100 000 write cycles per sector
 More than 20 years data retention
 Packages
â RoHS compliant
VDFPN8 (ME)
8 Ã 6 mm (MLP8)
VDFPN8 (MD)
8 Ã 6 mm (MLP8)
(with reduced D2
dimension)
SO16 (MF)
300 mils width
TBGA24 (ZM) 6x8 mm
 Automotive Certified Parts Available
November 2009
Rev 10
1/70
www.numonyx.com
1
|
▷ |