PL1816-NTE Datasheet, PDF (3/7 Pages) NTE Electronics – MATERIAL SAFETY DATA SHEET

MSDS Ref. No:PL1816-NTE-25F
GENERAL PROCEDURES: Vacuum or sweep up material and place in a disposal container.
7. HANDLING AND STORAGE
GENERAL PROCEDURES: Wash thoroughly after handling. Use only in a well ventilated area. Store in a cool
dry place.
HANDLING: Use with adequate ventilation.
STORAGE: Store in a cool place in original container and protect from sunlight.
STORAGE TEMPERATURE: Not Determined
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
ENGINEERING CONTROLS: Use process enclosures, local exhaust ventilation, or other engineering controls to
control airborne levels below recommended exposure limits.
PERSONAL PROTECTIVE EQUIPMENT
EYES AND FACE: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
contact, wear splash-proof goggles.
SKIN: The glove(s) listed below may provide protection against permeation. Gloves of other chemically
resistant materials may not provide adequate protection.
Buna
Butyl
Natural Latex
Neoprene
Solvex
Butyl Rubber
Solvex
RESPIRATORY: NIOSH/MSHA approved air purifying respirator with an organic vapor cartridge or canister
may be permissible under certain circumstances where airborne concentrations are expected to exceed exposure
limits. Protection provided by air purifying respirators is limited. Use a positive pressure air supplied respirator if
there is any potential for an uncontrolled release, exposure levels are not known, or any other circumstances
where air purifying respirators may not provide adequate protection.
WORK HYGIENIC PRACTICES: Wash hands before eating and wash before reuse.
9. PHYSICAL AND CHEMICAL PROPERTIES
PHYSICAL STATE: Solid
ODOR: None
APPEARANCE: Copper braid with resin on surface.
pH: Not Applicable
PERCENT VOLATILE: None
file:///N|/MSDS/1498cwq0.htm (3 of 7)1/13/2004 11:54:05 AM