NTE935 Datasheet, PDF (2/2 Pages) NTE Electronics – Integrated Circuit 3-Terminal Adjustable Positive Voltage Regulator 1.2V to 32V, 5A

Electrical Characteristics: (+25°C ≤ TJ ≤ +150°C, V_IN –V_OUT = 5V and I_OUT = 2.5A, Note 1
unless otherwise specified)
Parameter
Test Conditions
Line Regulation
Load Regulation
Thermal Regulation
Adjustment Pin Current
3V ≤ (V_IN –V_OUT) ≤ 35V, I_L = 0.01A, Note 2
3V ≤ (V_IN –V_OUT) ≤ 35V, I_L = 0.01A, T_A = +25°C, Note 2
10mA ≤ I_OUT ≤ 5A, Note 2
10mA ≤ I_OUT ≤ 5A, T_A = +25°C, Note 2
Pulse = 20ms, T_J = +25°C
Adjustment Pin Current Change 10mA ≤ I_L ≤ 5A, 3V ≤ (V_IN – V_OUT) ≤ 35V
Reference Voltage
3 ≤ (V_IN – V_OUT) ≤ 35V, 10mA ≤ I_OUT ≤ 5A, P ≤ 50W,
Note 3
Temperature Stability
T_MIN ≤ T_J ≤ T_MAX
Minimum Load Current
(V_IN –V_OUT) = 35V
Current Limit
(V_IN – V_OUT) ≤10V
(V_IN – V_OUT) ≤ 30V
RMS Output Noise, % of V_OUT T_J = +25°C, 10Hz ≤ f ≤ 10kHz
Ripple Rejection Ratio
V_OUT= 10V, f = 120Hz
C_ADJ = 10µF
Long Term Stability
T_J = +125°C
Min Typ Max Unit
– 0.02 0.06 %/V
– 0.005 0.03 %/V
– 0.3 1.0 %
– 0.1 0.5 %
– 0.002 0.02 %/W
– 45 100 µA
– 0.2 5.0 µA
1.19 1.24 1.29 V
– 1 –%
– 3.5 10 mA
5.0 8.0 – A
– 1.0 – A
– 0.003 – %
– 60 – dB
60 75 – dB
– 0.3 1.0 %
Note 1. Power dissipation is internally limited, these specifications are applicable for power dissipations
up to 50W.
Note 2. Regulation is measured at constant junction temperature. Changes in output voltage due
to heating effects are taken into account separately by thermal regulation.
Note 3. Selected devices with tightened tolerance reference voltage.
.350 (8.89)
.135 (3.45) Max
.875 (22.2)
Dia Max
Seating Plane
.312 (7.93) Min
.040 (1.02)
V_IN
.215 (5.45)
.430
(10.92)
1.187 (30.16)
.665
(16.9)
.156 (3.96) Dia
(2 Holes)
.188 (4.8) R Max
Adjust
.525 (13.35) R Max
V_OUT/Case