NTE3076 Datasheet, PDF (2/3 Pages) NTE Electronics – 0.560 Inch, Seven Segment, 1 Digit w/Overflow and , Common Anode, RHDP

Operating Characteristics: (T_A = +25°C unless otherwise specified)
Parameter
Test Conditions
Min Typ Max Unit
Luminous Intensity, Digit Average
Peak Emission Wavelength
I_F = 10mA (Note 3,4)
125 420 − μcd
− 650 − nm
Spectral Line Half Width
−
20
− nm
Forward Voltage
Segment
Decimal Point
I_F = 20mA
−
−
2.0
V
−
−
2.0
V
Dynamic Resistance
Segment
Decimal Point
I_pk = 100mA
−
2
−
Ω
−
2
−
Ω
Capacitance
Segment
V=0
−
35 80 pF
Decimal Point
−
35 80 pF
Reverse Current
Segment
Decimal Point
V_R = 5.0V
−
− 100 μA
−
− 100 μA
Segment C or D of “+”
−
− 100 μA
Note 3. The digit average Luminous Intensity is obtained by summing the Luminous Intensity of each
segment and dividing by the total number of segments. Intensity will not vary mopre than
±33% between all segments within a digit.
Note 4. The decimal point is designed to have the same surface brightness as the segments, there-
fore, the Luminous Intensity of the decimal point is .3 times the Luminous Intensity of the seg-
ments, since the area of the decimal point is .3 times the area of the average points.
Pin Connection Diagram
Cathode C (1) 1
Cathode D (1) 2
Cathode B (1) 3
Cathode D.P. (1) 4
Cathode E (2) 5
Cathode D (2) 6
Cathode G (2) 7
Cathode C (2) 8
Cathode D.P. (2) 9
18 N.C.
17 N.C.
16 N.C.
15 Cathode A (1)
14 Common Anode (1)
13 Common Anode (2)
12 Cathode F (2)
11 Cathode A (2)
10 Cathode B (2)