NTE2986 Datasheet, PDF (2/3 Pages) NTE Electronics – Logic Level MOSFET N-Channel, Enhancement Mode High Speed Switch

Electrical Characteristics: (T_C = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Drain–Source Breakdown Voltage
BV_DSS V_GS = 0v, I_D = 250µA
Breakdown Voltage Temperature
Coefficient
∆V_(BR)DSS/ Reference to +25°C, I_D = 1mA
∆T_J
Static Drain–Source ON Resistance R_DS(on) V_GS = 5V, I_D = 31A, Note 4
V_GS = 4V, I_D = 25A, Note 4
Gate Threshold Voltage
V_GS(th) V_DS = V_GS, I_D = 250µA
Forward Transconductance
g_fs
V_DS ≥ 25V, I_D = 31A, Note 4
Drain–to–Source Leakage Current
I_DSS V_DS = 60V, V_GS = 0
V_DS = 48V, V_GS = 0V, , T_C = +150°C
Gate–Source Leakage Forward
I_GSS V_GS = 10V
Gate–Source Leakage Reverse
I_GSS V_GS = –10V
Total Gate Charge
Q_g
V_GS = 5V, I_D = 51A, V_DS = 48V
Gate–Source Charge
Q_gs
Gate–Drain (“Miller”) Charge
Q_gd
Turn–On Delay Time
Rise Time
t_d(on)
t_r
V_DD = 30V_, I_D = 51A, R_G = 4.6Ω,
R_D = 0.56Ω
Turn–Off Delay Time
t_d(off)
Fall Time
t_f
Internal Drain Inductance
Internal Source Inductance
L_D
Between lead, 6mm (0.25”) from
L_S
package and center of die contact
Input Capacitance
C_iss V_GS = 0V, V_DS = 25V, f = 1MHz
Output Capacitance
C_oss
Reverse Transfer Capacitance
C_rss
Source–Drain Diode Ratings and Characteristics
60 –
–
V
– 0.07 – V/°C
– – 0.028 Ω
– – 0.039 Ω
1.0 – 2.0 V
23 – – mhos
– – 25 µA
– – 250 µA
– – 100 nA
– – –100 nA
– – 66 nC
– – 12 nC
– – 43 nC
– 17 – ns
– 230 – ns
– 42 – ns
– 110 – ns
– 4.5 – nH
– 7.5 – nH
– 3300 – pF
– 1200 – pF
– 200 – pF
Continuous Source Current
Pulse Source Current
Diode Forward Voltage
Reverse Recovery Time
Reverse Recovery Charge
Forward Turn–On Time
I_S
(Body Diode)
– – 50 A
I_SM (Body Diode) Note 1
– – 200 A
V_SD T_J = +25°C, I_S = 51A, V_GS = 0V, Note 4 – – 2.5 V
t_rr
T_J = +25°C, I_F = 51A, di/dt = 100A/µs, – 130 180 ns
Q_rr
Note 4
– 0.84 1.3 µC
t_on
Intrinsic turn–on time is neglegible
(turn–on is dominated by L_S + L_D)
Note 1. Repetitive Rating: Pulse width limited by maximum junction temperature.
Note 4. Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2%.