NTE2924 Datasheet, PDF (2/3 Pages) NTE Electronics – MOSFET N-Ch, Enhancement Mode High Speed Switch

Electrical Characteristics: (T_J = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Drain–to–Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
Static Drain–to–Source On–Resistance
Gate Threshold Voltage
V_(BR)DSS
∆V_(BR)DSS
∆T_J
R_DS(on)
V_GS(th)
V_GS = 0V, I_D = 250µA
Reference to +25°C, I_D = 1mA
V_GS = 10V, I_D = 4.1A, Note 4
V_DS = V_GS, I_D = 250µA
600 –
–
V
– 0.70 – V/°C
– – 1.2 Ω
2.0 – 4.0 V
Forward Transconductance
Drain–to–Source Leakage Current
Gate–to–Source Forward Leakage
Gate–to–Source Reverse Leakage
g_fs
V_DS = 100V, I_D = 4.1A, Note4
4.9 –
– mhos
I_DSS V_DS = 600V, V_GS = 0V
– – 100 µA
V_DS = 480V, V_GS = 0V, T_J = +125°C –
– 500 µA
I_GSS V_GS = 20V
– – 100 nA
I_GSS V_GS = –20V
– – –100 nA
Total Gate Charge
Gate–to–Source Charge
Gate–to–Drain (“Miller”) Charge
Turn–On Delay Time
Rise Time
Q_g
Q_gs
Q_gd
t_d(on)
t_r
I_D = 6.2A, V_DS = 360V, V_GS = 10V, –
Note 4
–
–
V_DD = 300V, I_D = 6.2A, R_G = 9.1Ω, –
R_D = 47Ω, Note 4
–
– 60 nC
– 8.3 nC
– 30 nC
13 – ns
18 – ns
Turn–Off Delay Time
Fall Time
Internal Drain Inductance
Internal Source Inductance
t_d(off)
– 55 – ns
t_f
– 20 – ns
L_D
Between lead, .250in. (6.0) mm from – 5.0 –
nH
L_S
package and center of die contact
– 13 – nH
Input Capacitance
Output Capacitance
Reverse Transfer Capaticance
C_iss
C_oss
C_rss
V_GS = 0V, V_DS = 25V, f = 1MHz
– 1300 – pF
– 160 – pF
– 30 – pF
Source–Drain Ratings and Characteristics:
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Continuous Source Current (Body Diode)
Pulsed Source Current (Body Diode)
Diode Forward Voltage
I_S
I_SM Note 1
V_SD T_J = +25°C, I_S = 6.8A, V_GS = 0V,
Note 4
– – 6.8 A
– – 27 A
– – 1.5 V
Reverse Recovery Time
Reverse Recovery Charge
t_rr T_J = +25°C, I_F = 6.2A,
Q_rr ^{di/dt = 100A/µs, Note 4}
– 450 940 ns
– 3.8 7.9 µC
Forward Turn–On Time
t_on Intrinsic turn–on time is neglegible (turn–on is dominated by L_S+L_D)
Note 1. Repetitive rating; pulse width limited by maximum junction temperature.
Note 4. Pulse width ≤ 300µs; duty cycle ≤ 2%.