NTE1934 Datasheet, PDF (2/2 Pages) NTE Electronics – Integrated Circuit Positive Voltage Regulator, 5V, 2A

V_IN
DC Input
External Circuit
D₁
2
1
+
3
– ^{C1 V}O
DC Output
Note 1. Output capacitor C₁ (47 to 100µf) shall be connected directly to output terminal (Pin1)
and GND terminal (PIn3) as shown above.
Note 2. When wiring between the regulator and the load is long, another capacitor (47 to 100µf)
shall be added in parallel with the load.
Note 3. If there is a possibility of reverse biasing between input and output, a protection diode
(D₁) is to be added. The recommended diode for D₁ is NTE116.
.190 (4.82)
.787
(20.0)
.615 (15.62)
V_IN
.591
(15.02)
.126 (3.22)
Dia
.787
(20.0)
V_O V_IN
GND
.215 (5.47)