NTE1924 Datasheet, PDF (2/2 Pages) NTE Electronics – Integrated Circuit Positive 3 Terminal Voltage Regulator, 24V, 1.5A

Electrical Characteristics: (T_J = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Output Voltage
Input–Output Differential
Line Regulation
V_O
V_IN–V_O
REG_LINE
V_IN = 27V to 34V, I_O = 10mA to 1.5A, Note 3
I_O = 1.5A, T_J = 0° to +125°C
V_IN = 27V to 39V, I_O = 1.5A, Note 3
23.05 24.0 25.05
2.4 –
–
–
– 1.5
V
V
% V_O
Load Regulation
REG_LOAD V_IN = 29V, I_O = 10mA to 1.5A, Note 3
–
– 0.6 % V_O
Quiescent Current
I_Q
V_IN = 27V, I_O = 10mA
–
Quiescent Current Line I_{Q (LINE)} V_IN = 27V to 34V, I_O = 10mA
–
Quiescent Current Load I_{Q (LOAD)} V_IN = 27V, I_O = 10mA to 1.5A
–
Current Limit
I_LIM V_IN = 29V, Note 3
–
Temperature Coefficient
T_C V_IN = 27V, I_O = 0.1A, T_J = 0° to +125°C
–
Output Noise Voltage
V_N V_IN = 27V, I_O = 0.1A, T_J = 0° to +125°C, Note 4 –
Ripple Attenuation
R_A V_IN = 29V, I_O = 1A, T_J = 0° to +125°C, Note 5
60
Power Dissipation
P_D
V_IN – V_OUT (2.4V to 10.0V), I_O = 10mA to 1.5A,
–
T_J = 0° to +125°C
– 18
mA
–
5
mA
–
5
mA
– 5.2
A
– 0.02 % V_O/°C
–
10 µV_rms/V
–
–
dB
– 15
W
Note 3. Low duty cycle pulse testing with Kelvin connectors required. Die temperature changes
must be accounted for separately.
Note 4. BW = 10Hz to 100kHz.
Note 5. Ripple attenuation is specified for a 1Vrms, 120Hz, input ripple. Ripple attenuation is mini-
mum of 60dB at 5V output and is 1dB less for each volt increase in the output voltage.
.135 (3.45) Max
.350 (8.89)
.875 (22.2)
Dia Max
Seating
Plane
.312 (7.93) Min
.040 (1.02)
V_OUT
.215 (5.45)
.430
(10.92)
1.187 (30.16)
.665
(16.9)
.156 (3.96) Dia
(2 Holes)
.188 (4.8) R Max
.525 (13.35) R Max
V_IN
Common/Case