NTE1799 Datasheet, PDF (2/3 Pages) NTE Electronics – Integrated Circuit Electronics Switch for VCR & Audio Applications

Operating Characteristics (Cont’d): (T_A = +25°C, V_CC = 12V unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Switch Changeover Voltage
Mute Threshold Voltage
Crosstalk Between Channels
Ch1
Ch2
Ch3
V_CTLs
V_ML
V_MH
Note 1
Low Level, Note 3
High Level, Note 3
R_g = 500Ω, R_L = ∞,
Other channel input R_g = 50Ω, 2V_P–P,
f = 3.58MHz, Note 4
2.6 3.1 4.0 V
1.2 1.6 1.9 V
5.5 6.9 8.2 V
–50 –68 – dB
–50 –68 – dB
–50 –60 – dB
Mute Compression Ratio
R_g = 600Ω, 2V_P–P, f = 1kHz, R_L = ∞,
Series Resistance 10kΩ, Note 3
– –60 – dB
Control Pin Flow–In Current
Input Impedance
Output Impedance
I_CTL Note 1
z_in Note 1
z_out Note 1
– 3.8 – µA
– 10 – kΩ
– 29 –
Ω
Pin Voltage (Pin1)
Pin Voltage (Pin2)
V₁ V₁₅ = 0V
V₁₅ = 12V
V₂
– 7.9 –
V
– 7.9 –
V
– 7.2 –
V
Pin Voltage (Pin5)
V₅ V₁₃ = 0V
– 7.9 –
V
Pin Voltage (Pin6)
Pin Voltage (Pin7)
Pin Voltage (Pin8)
V₁₃ = 12V
V₆
V₇
V₈ V₁₀ = 0V
– 7.9 –
V
– 7.2 –
V
– 7.2 –
V
– 7.9 –
V
Pin Voltage (Pin9)
Pin Voltage (Pin12)
V₁₀ = 12V
V₉ V₁₀ = 0V
V₁₀ = 12V
V₁₂ V₁₃ = 0V
– 7.9 –
V
– 7.9 –
V
– 7.9 –
V
– 7.9 –
V
V₁₃ = 12V
– 7.9 –
V
Pin Voltage (Pin16)
V₁₆ V₁₅ = 0V
V₁₅ = 12V
– 7.9 –
V
– 7.9 –
V
Note 1. Measurements are made for each of Ch1, Ch2, and Ch3 using input A and input B.
Input A: V_CTL (Pin10, Pin13, Pin15) is 12V at the measurement mode.
Input B: V_CTL is 0V at the measurement mode.
Note 2. Measurements are made using input A and input B.
Note 3. Measurements are made for Ch2, Ch3.
Note 4. Measurements are made for each of Ch1, Ch2, and Ch3 using input A and input B on other
channel.