NTE926 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Quad Timer

NTE926
Integrated Circuit
Quad Timer
Description:
The NTE926 quad timer is a monolithic timing device which can be used to produce four independent
timing functions. The NTE926 output sinks current. This highly stable, general purpose controller
can be used in a monostable mode to produce accurate time delays–from microseconds to hours.
In the time delay mode of operation, the time is precisely controlled by one external resistor and one
capacitor. A stable operation can be achieved by using two of the four timer sections.
The four timer section in the NTE926 are edge–triggered, therefore, when connected in tandem for
sequential timing applications, no coupling capacitors are required. Output current capability of
100mA is provided in both devices.
Features:
D 100mA Output Current per Section
D Edge–triggered (No Coupling Capacitor)
D Output Independent of Trigger Conditions
D Wide Supply Voltage Range 4.5V to 18V
D Timer Intervals from Microseconds to Hours
D Time Period Equals RC
Applications:
D Sequential Timing
D Time Delay Generation
D Precision Timing
D Quad One–Shot
Absolute Maximum Ratings:
Supply Voltage, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +16V
Maximum Power Dissipation (T_A = +25°C), P_D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1450mW
Derate Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11.6mW/°C
Operating Ambient Temperature Range, T_A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +70°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65 to +150°C
Lead Soldering Temperature (10 Sec Max), T_SOLD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C