|
NTE799 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Four Channel “SQ” Decoder | |||
|
NTE799
Integrated Circuit
Four Channel âSQâ Decoder
Description:
The NTE799 consists of two high input impedance preamplifiers which are fed with left total, LT, and
right total, RT signals. The preamplifiers each feed two allâphase networks which generate two LT
signals in quadrature and two RT signals in quadrature. The four signals are matrixed to yield left front,
left back, right front, and right back signals (LF, LB, RF, RB).
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25V
Power Dissipation (TA = +25°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 750mW
Derate Above +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7mW/°C
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +75°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â65° to +150°C
Electrical Characteristics: (VCC = +20V, Vin = 0.5V(RMS) @ 1kHz, TA = +25°C unless otherwise
specified)
Parameter
Min Typ Max Unit
Supply Current Drain
11
16
21
mA
Input Impedance
1.8
3.0
â
mâ¦
Output Impedance
â
5.0
â
kâ¦
Channel Balance (LF/RF)
Voltage Gain LF/LT or RF/RT
Relative Voltage Gain LBâ/LFâ or RF/RT
Maximum Input Voltage for 1% THD at Output RT or LT
â1.0
0
+1.0
dB
â1.0
0
+1.0
dB
â1.0
0
+1.0
dB
2.0
â
â
V(RMS)
Total Harmonic Distortion RT or LT
â
0.1
â
%
Signal to Noise Ratio (ShortâCircuit Input VO = 0.5V(RMS) with Output Noise
Referenced to Output Voltage, VO) (BW = 20Hz to 20kHz)
â
80
â
dB
|
▷ |