|
NTE7174 Datasheet, PDF (1/3 Pages) NTE Electronics – Integrated Circuit Quad EIA−422 Line Receiver With Three−State Outputs | |||
|
NTE7174
Integrated Circuit
Quad EIAâ422 Line Receiver
With ThreeâState Outputs
Description:
The NTE7174 is a Quad EIAâ422/3 Receiver in a 16âLead DIP type package that features four inde-
pendent receiver chains which comply with EIA Standards for the Electrical Characteristics of Bal-
anced/Unbalanced Voltage Digital Interface Circuits. The Receiver outputs are 74LS compatible,
threeâstate structures which are forced to a high impedence state when the appropriate output control
pin reaches a logic zero condition. A PNP device buffers each output pin to assure minimum loading
for either logic one or logic zero inputs. In addition, each receiver chain has internal hysteresis circuitry
to improve noise margain and discourage output instability for slowly changing input waveforms.
Features:
D Four Independent Receiver Chains
D ThreeâState Outputs
D High Impedance Output Control Inputs (PIA Compatible)
D Internal Hysteresis â 30mV (Typ) @ Zero Volts Common Mode
D Fast Propagation Times â 25ns (Typ)
D TTL Compatible
D Single 5V Supply Voltage
Absolute Maximum Ratings:
Power Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0V
Input Common Mode Voltage, VICM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±15
Input Differential Voltage, VID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±25
ThreeâState Control Input Voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0Vdc
Output Sink Current, IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â65° to +150°C
Operating Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Recommended Operating Conditions:
Parameter
Symbol
Power Supply Voltage
VCC
Operating Ambient Temperature
Input Common Mode Voltage
Input Differenctial Voltage
TA
VICR
VIDR
Test Conditions
Min Typ Max Unit
4.75 â 5.25 V
0 â 70 °C
â7 â +7 V
â
6
â
V
|
▷ |