|
NTE7150 Datasheet, PDF (1/8 Pages) NTE Electronics – Integrated Circuit Video, Chroma, and Sync. Signal Processing Circuit for PAL/NTSC/SECAM System Color Televisions | |||
|
NTE7150
Integrated Circuit
Video, Chroma, and Sync. Signal Processing Circuit
for PAL/NTSC/SECAM System Color Televisions
Description:
The NTE7150 is an integrated circuit in a 64âLead SIP type package designed for PAL/NTSC/SECAM
system color televisions involving video, chroma, and sync. signal processing circuits.
The video section contains a highâperformance picture quality emphasis circuit, the chroma section
contains a PAL/NTSC/SECAM system automatic identification circuit, and the sync. section contains
a 50/60Hz automatic identification circuit. The PAL/SECAM demodulating circuit uses a baseband
signal processing system, providing an adjustmentâfree demodulating circuit. User control functions,
system switching, etc. are controlled via the I2C bus.
Features:
Video Section
D Sharpness Control with Internal Delay Lines
D Black Stretching Circuit
D YNR
D Variable DC Restoration Ratio
D Gamma (g) Contrast Correction
Chroma Section
D PAL/SECAM baseband Demodulation System
D Automatic Srystal Frequency Identification (4.43MHz/3.58MHz/M, NâPAL)
D Automatic Chroma System Identification (PAL/NTSC/SECAM)
D PLL SECAM AdjustmentâFree Demodulation Circuit without and Tank Coils
D BuiltâIn SECAM BELL Filter
Sync. Section
D AdjnustmentâFree Horizontal and Vertical Oscillation Circuits based on Countdown System
D Automatic Vertical Frequency Identification (50/60Hz)
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15V
Power Dissipation, PDmax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2660mW
Derate Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21.2mW/°C
Input Signal Amplitude, ein . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5VPâP
Applied Voltage, Ein . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . GNDâ0.3V to VCC+0.3V
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â20° to +65°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â55° to +150°C
Recommended Operating Conditions:
Parameter
Test Conditions
Supply Voltage
At Pin19, Pin36, Pin50, and Pin59
At Pin5
At Pin4
Min Typ Max Unit
8.1 9.0 9.5 V
8.1 9.0 10.0 V
3.0 3.3 3.6 V
|
▷ |