|
NTE713 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Chroma Demod | |||
|
NTE713
Integrated Circuit
Chroma Demod
Description:
The NTE713 is a monolithic integrated circuit in a 14âLead DIP type package that contains two sets
of synchronous detectors with matrix circuits to achieve the RâY, GâY, and BâY color difference output
signals. The chroma input signal is applied to Pin3 and Pin4 while the oscillator injection signal is
applied to Pin6 and Pin7. The color difference signals, after matrix, have fixed a relationship of ampli-
tude and phase nominally equal DC voltage levels. The outputs of the NTE713 are suitable for driving
high level color difference or R, G, B output amplifiers. Emitterâfollower output stages used to drive
the high level color amplifiers have shortâcircuit protection.
Features:
D Synchronous Detector with Color Difference Matrix
D EmitterâFollower Output Amplifier with ShortâCircuit Protection
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
DC Supply Voltage (Pin8 to Pin14) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27V
Reference Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5VPâP
Chroma Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5VPâP
Device Dissipation (TA ⤠+70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 530mW
Derate Linearly Above 70°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.7mW/°C
Operating Ambient Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â40° to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â65° to +150°C
Lead Temperature (During Soldering, 1/32â from seating plane, 10sec max) . . . . . . . . . . . . +265°C
Electrical Characteristics: (V+ = 24V, TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Static Characteristics
Supply Current
with Output Loads
With No Output Loads
IT
S1 Closed
S1 Open
16.5 â 26.5 mA
â
9
â mA
GâY, RâY, BâY Outputs
Chroma Inputs
Reference Subcarrier
V9, V11, V13 S1 Closed
V3, V4 S1 Open
V6, V7 S1 Open
13.2 14.7 15.8 V
â 3.3 â
V
â 6.2 â
V
|
▷ |