NTE7023 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Module, 3 Output Positive Voltage Regulator for VCR

NTE7023
Integrated Circuit
Module, 3 Output Positive Voltage
Regulator for VCR
Features:
D 3 Outputs
D Output Voltage Select Function
Absolute Maximum Ratings: (T_A = +25°C unless otherwise specified)
Maximum DC Input Voltage, V_IN (DC) Max
V_O1, V_O2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
V_O3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Maximum Output Current, I_O Max
Average . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0A
Peak (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.0A
Operating Case Temperature, T_C Max . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +105°C
Junction Temperature, T_J Max . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Temperature Range, T_opr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +85°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –30° to +105°C
Thermal Resistance, Junction–to–Case, R_thJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7.0°C/W
Note 1. Peak Current: For 0.1 sec Max.
Electrical Characteristics: (T_A = +25°C unless otherwise specified)
Parameter
Test Conditions
V_O1
V_O2
Output Voltage Setting
Condition 1, Note 2
12.0 ±0.3 12.0±0.1
Output Cutoff Residual Voltage Condition 1, Note 3
0.1
0.1
Ripple Voltage
Condition 2
20
5
Temperature Coefficient
Condition 1
0.02
0.02
Line Regulation
Condition 2
10
10
Condition 3
20
2
Load Regulation
Condition 4
150
45
Minimum Input–Output Voltage Condition 5
Difference
1.2
1.2
V_O3
5.3±0.1
5.3 ±0.13
5
0.03
10
2
45
1.2
Unit
V
V Max
mV_p–p Max
%/°C Max
mV/V Max
mV/V Max
mV/A Max
V Max
Note 2. Measurement must be made within 1 to 2 sec. after input switch is ON.
Note 3. When Pin10 is at High level (3V to 15V), V_O1 is in OFFstate. When Pin10 is at Low level
(0.6V or less), V_O1 is in ON state.