English
Language : 

NTE7019 Datasheet, PDF (1/3 Pages) NTE Electronics – Integrated Circuit Digital Tuning System Interface for TV Systems
NTE7019
Integrated Circuit
Digital Tuning System Interface for TV Systems
Description:
The NTE7019 is an integrated circuit in a 16–Lead DIP type package developed to facilitate the Phase
Lock Loop (PLL) digital tuning system interface for TV systems. Since all the peripheral blocks are
incorporated into this device, the number of peripheral parts can be greatly reduced.
Features:
D All–in–One Chip Incorporating the Peripheral Blocks of the PLL System
D Built–In Synchronized Separate for Channel Detecting Circuit
D Externally Controllable Channel Detection Level
D High Current Low–Saturation–Voltage Band Switch Output: VO(sat) = 0.3V Typ @ IOH = –40mA
D Built–In Channel Tuning Voltage: 34V Typ
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Supply Voltage, VCC1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.4V
Band Output Current, IOH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –60mA
Band Output Applied Voltage, VOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –15V
Zener Terminal Current, Iz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15mA
Channel Detection Output Applied Voltage, VOH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC1 V
Band Input Voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to VCC1 V
Video Signal Input Voltage, VCV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to 5V
Error Amplifier Input Voltage, VAI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to VCC1 V
Error Amplifier Output Current, IAO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –5mA
Flyback Pulse Input Voltage, VFBP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC1 VP
Allowable Power Dissipation (TA = +60°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600mW
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +65°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +150°C
Recommended Operating Conditions:
Parameter
Supply Voltage
Band Signal High–Level Input Voltage
Band Signal Low–Level Input Voltage
Video Signal Input Voltage
Flyback Pulse High–Level Input Voltage
Flyback Pulse Low–Level Input Voltage
Incoming Current to Pin11
Symbol
Min Typ Max Unit
VCC1
8.1 12.0 13.2 V
eBIH (V1H, V2H) 3.1 – 5.5 V
eBIL (V1L, V2L) 0
– 0.8 V
eiv (V3)
–
2
– VP–P
eFBPH (V4H) 5.0 – 8.0 V
eFBPL (V4L)
0 – 0.7 V
I11
5 – 6 mA