|
NTE6885 Datasheet, PDF (1/4 Pages) NTE Electronics – Integrated Circuit Hex 3-State Buffer/Inverter | |||
|
NTE6885 thru NTE6888
Integrated Circuit
Hex 3âState Buffer/Inverter
Description:
The NTE6885 thru NTE6888 series of devices combines three features usually found desirable in
busâoriented systems: 1) High impedance logic inputs insure that these devices do not seriously load
the bus; 2) Threeâstate logic configuration allows buffers not being utilized to be effectively removed
from the bus; 3) Schottky technology allows highâspeed operation.
While the NTE6885 to NTE6888 are all buffers, the devices differ in that the NTE6885 (nonâinverting)
and the NTE6886 (inverting) provide a twoâinput Enable which controls all six buffers, while the
NTE6887 (nonâinverting) and the NTE6888 (inverting) provide two Enable inputs; one controlling
four buffers and the other controlling the remaining two buffers.
These units are wellâsuited for Address buffers on the M6800 or similar microprocessor application.
Features:
D High Speed: 8.0ns (Typ)
D ThreeâState Logic Configuration
D Single +5V Power Supply Requirement
D Compatible with 74LS Logic or 6800 Microprocessor Systems
D High Impedance PNP Inputs Assure Minimal Loading of the Bus
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified for ALL devices)
Power Supply Voltage, VCO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8.0V
Input Voltage, VI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5V
Operating Ambient Temperature Range, TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 to +75°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â55° to +150°C
Operating Junction Temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Electrical Characteristics: (0°C ⤠TA ⤠75°C and 4.75V ⤠VCC ⤠5.25V unless otherwise specified
for ALL devices)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Input Voltage â High Logic State
Input Voltage â Low Logic State
Input Current â High Logic State
Input Current â Low Logic State
Input Current â High Impedance State
VIH
VIL
IIH
IIL
IIH(E)
VCC = 4.75V, TA = +25°C
2.0
VCC = 4.75V, TA = +25°C
â
VCC = 5.25V, VIH = 2.4V
â
VCC = 5.25V, VIL = 0.5V, VIL(E) = 0.5V â
VCC = 5.25V, VIL(I) = 0.5V, VIH(E) = 2V â
â âV
â 0.8 V
â 40 µA
â â400 µA
â â40 µA
|
▷ |