English
Language : 

NTE30126 Datasheet, PDF (1/2 Pages) NTE Electronics – Super Bright LED Indicator Ultra Bright Pink, 5mm
NTE30126
Super Bright LED Indicator
Ultra Bright Pink, 5mm
Features:
D Low Power Consumption
D High Efficiency
D Versatile Mounting on P.C. Board or Panel
D Low Current Requirement
D Reliable and Robust
Applications:
D TV Sets
D Monitor
D Telephone
D Computer
D Circuit Board
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70mW
Peak Forward Current (1/10th Duty Cycle, 0.1ms Pulse Width), IFM . . . . . . . . . . . . . . . . . . . . . 20mA
Continuous Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +100°C
Lead Temperature (During Soldering, 3mm from Body, 5sec Max), TL . . . . . . . . . . . . . . . . . . +260°C
Electrical Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Luminous Intensity
View Angle of Half Power
Dominant Emission Wavelength
X
Y
IV IF = 20mA
2 q1/2 IF = 20mA
λd IF = 20mA
2500 − mcd
− 35 − deg
0.31 − 0.39 nm
0.19 − 0.27 nm
Forward Voltage
Reverse Current
VF IF = 20mA
IR VR = 5V
3.0 3.45 3.8 V
− − 10 μA
Note 1. Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE eye−response curve.
Note 2. q1/2 is the off−axis angle at which the luminous intensity is half the axial luminous intensity.
Note 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents
the single wavelenght, which defines the color of the device.