English
Language : 

NTE30124 Datasheet, PDF (1/2 Pages) NTE Electronics – Super Bright LED Indicator Super Purple, 10mm
NTE30124
Super Bright LED Indicator
Super Purple, 10mm
Features:
D Low Power Consumption
D High Efficiency
D Versatile Mounting on P.C. Board or Panel
D Low Current Requirement
D Reliable and Robust
Applications:
D TV Sets
D Monitor
D Telephone
D Computer
D Circuit Board
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80mW
Peak Forward Current (1/10th Duty Cycle, 0.1ms Pulse Width), IFM . . . . . . . . . . . . . . . . . . . . 100mA
Continuous Forward Current, IF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25° to +85°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -25° to +100°C
Lead Temperature (During Soldering, 3mm from Body, 5sec Max), TL . . . . . . . . . . . . . . . . . . +260°C
Electrical Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Luminous Intensity
View Angle of Half Power
Peak Emission Wavelength
Dominant Emission Wavelength
Full Width at Half Max
Forward Voltage
Reverse Current
IV
2 q1/2
λP
λd
Δλ
VF
IR
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
VR = 5V
150 180 - mcd
- 20 - deg
- 400 - nm
- - - nm
- 12.3 - nm
- 3.3 4.0 V
- - 10 μA
Note 1. Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE eye-response curve.
Note 2. q1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Note 3. The dominant wavelength (λd) is derived from the CIE chromaticity diagram and represents
the single wavelenght, which defines the color of the device.