NTE30120 Datasheet, PDF (1/2 Pages) NTE Electronics – Super Bright LED Indicator Super Purple, 3mm

NTE30120
Super Bright LED Indicator
Super Purple, 3mm
Features:
D Low Power Consumption
D High Efficiency
D Versatile Mounting on P.C. Board or Panel
D Low Current Requirement
D Reliable and Robust
Applications:
D TV Sets
D Monitor
D Telephone
D Computer
D Circuit Board
Absolute Maximum Ratings: (T_A = +25°C unless otherwise specified)
Power Dissipation, P_D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120mW
Peak Forward Current (1/10th Duty Cycle, 0.1ms Pulse Width), I_FM . . . . . . . . . . . . . . . . . . . . 100mA
Continuous Forward Current, I_F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA
Reverse Voltage, V_R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V
Operating Temperature Range, T_opr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -35° to +85°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40° to +100°C
Lead Temperature (During Soldering, 3mm from Body, 5sec Max), T_L . . . . . . . . . . . . . . . . . . +260°C
Electrical Optical Characteristics: (T_A = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Luminous Intensity
View Angle of Half Power
Peak Emission Wavelength
Dominant Emission Wavelength
Full Width at Half Max
Forward Voltage
Reverse Current
I_V
2 q_1/2
λ_P
λ_d
Δλ
V_F
I_R
I_F = 20mA
I_F = 20mA
I_F = 20mA
I_F = 20mA
I_F = 20mA
I_F = 20mA
V_R = 5V
60 75 - mcd
- 25 - deg
- 400 - nm
- - - nm
- 12.4 - nm
- 3.3 4.0 V
- - 10 μA
Note 1. Luminous intensity is measured with a light sensor and filter combination that approximates
the CIE eye-response curve.
Note 2. q_1/2 is the off-axis angle at which the luminous intensity is half the axial luminous intensity.
Note 3. The dominant wavelength (λ_d) is derived from the CIE chromaticity diagram and represents
the single wavelenght, which defines the color of the device.