English
Language : 

NTE3002 Datasheet, PDF (1/2 Pages) NTE Electronics – Light Emitting Diode Water Clear, Yellow
NTE3002
Light Emitting Diode
Water Clear, Yellow
Description:
The NTE3002 is a yellow source color device made with Gallium Arsenide Phosphide on Gallium
Phosphide Yellow Light Emitting Diode in a two lead epoxy package with a clear lens. The NTE3002
is intended for high volume indicator light applications. Major usage is in applications such as diag-
nostic lights on printed circuit boards and panel lights. It can also be used to displace subminiature
lamps as small as T3/4 size.
Features:
D Subminiature Package
D Wide Viewing Angle
D Long Life Solid State Reliability
D Low package Profile
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105mW
Forward Current
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Peak (0.1 ms pulse width, 1/10 duty cycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140mA
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40° to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40° to +85°C
Lead Temperature (During Soldering, 5sec max, 2mm below package base) . . . . . . . . . . . . +260°C
Electro - Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Test Conditions
Min Typ Max Unit
Luminous Intensity
Peak Emission Wavelength
Dominate Wavelength
Spectral Line Halfwidth
Forward Voltage
Capacitance
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
V = 0, f = 1MHz
10 30 -
mcd
- 590 -
nm
- 588 -
nm
- 35 -
nm
- 2.1 2.5
V
- 20 -
pF
Reverse Current
View Angle (2θ1/2)
VR = 5.0V
Note 1
-
- 10
µA
- 20 - degrees
Note 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical
centerline value.
 ▷