English
Language : 

NTE3000_1 Datasheet, PDF (1/2 Pages) NTE Electronics – Light Emitting Diode Water Clear, High Efficiency Red
NTE3000
Light Emitting Diode
Water Clear, High Efficiency Red
Description:
The NTE3000 is a high efficiency red source color device made with Gallium Arsenide Phosphide on
Gallium Phosphide Orange Light Emitting Diode in a two lead epoxy package with a clear lens. The
NTE3000 is intended for high volume indicator light applications. Major usage is in applications such
as diagnostic lights on printed circuit boards and panel lights. It can also be used to displace subminia-
ture lamps as small as T3/4 size.
Features:
D Subminiature Package
D Wide Viewing Angle
D Long Life Solid State Reliability
D Low package Profile
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Power Dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105mW
Forward Current
Continuous . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA
Peak (0.1 ms pulse width, 1/10 duty cycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160mA
Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0V
Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40° to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 40° to +85°C
Lead Temperature (During Soldering, 5sec max, 2mm below package base) . . . . . . . . . . . . +260°C
Electro - Optical Characteristics: (TA = +25°C unless otherwise specified)
Parameter
Test Conditions
Min Typ Max Unit
Luminous Intensity
Peak Emission Wavelength
Dominate Wavelength
Spectral Line Halfwidth
Forward Voltage
Capacitance
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
IF = 20mA
V = 0, f = 1MHz
10 70 -
mcd
- 627 -
nm
- 625 -
nm
- 45 -
nm
- 2.0 2.5
V
- 15 -
pF
Reverse Current
View Angle (2θ1/2)
VR = 5.0V
Note 1
-
- 10
µA
- 20 - degrees
Note 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical
centerline value.
 ▷