NTE2088 Datasheet, PDF (1/3 Pages) NTE Electronics – Integrated Circuit 4-Segment Darlington Array, w/Pre-Driver Stage for use with PMOS and 12V CMOS

NTE2088
Integrated Circuit
4–Segment Darlington Array, ^w/Pre–Driver Stage
for use with PMOS and 12V CMOS
Description:
The NTE2088 is a High voltage, high current Darlington array in a 16–Lead DIP type package designed
as an interface between low–level logic and a variety of peripheral loads such as relays, solenoids, DC
and stepper motors, multiplexed LED and incandescent displays, heaters, and similar loads to 480
Watts (1.5A per output, 80V, 26% duty cycle).
This device has a minimum output breakdown of 50V and a minimum V_CE(sus) of 35V measured at
100mA, or a minimum output breakdown of 80V and a minimum V_CE(sus) of 50V.
A copper–alloy lead frame provides maximum power dissipation using standard cooling methods.
This lead configuration facilitates attachment of external heat sinks for increased power dissipation
with standard IC sockets and printed wiring boards.
Features:
D TTL, DTL, PMOS, CMOS Compatible Inputs
D Transient–Protected Outputs
D Loads to 480 Watts
D Heat Sink Contact Tabs on Quad Arrays
Absolute Maximum Ratings: (T_A = +25°C unless otherwise specified)
Output Voltage, V_CEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80V
Output Sustaining Voltage, V_CE(sus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
Output Current , I_OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.75A
Input Voltage, V_IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
Input Current (Note 1), I_B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mA
Supply Voltage, V_S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20V
Operating Temperature Range, T_A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +85°C
Storage Temperature Range, T_S . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to –150°C
Note 1. Input current may be limited by maximum allowable input voltage.
Electrical Characteristics: (T_A = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Output Leakage Current
Output Sustaining Voltage
I_CEX
V_CE(sus)
V_CE = 80V
V_CE = 80V, T_A = +70°C
I_C = 100mA, V_IN = –400mV
Min Typ Max Unit
– – 100 µA
– – 500 µA
50 – – V