NTE2033 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Non-Inverting Transistor Array, Low Input Active

NTE2033
Integrated Circuit
Non–Inverting Transistor Array, Low Input Active
Description:
The NTE2033 is a non–inverting transistor array, which is comprised of four NPN darlington out-
put stages and PNP input stages. This device is low level input active driver and is suitable for
operation with TTL, 5V C–MOS and 5V Microprocessor which have sink current output drivers.
Features:
D Output Current: 1.5A Max.
D High Sustaining Voltage: 50V Min.
D Low Level Active Inputs
D TTL and C–MOS Compatible Inputs
D Standard Supply Voltage
D Two V_CC Terminals V_CC1, V_CC2 (Separated)
Absolute Maximum Ratings: (T_A = +25°C unless otherwise specified)
Supply Voltage, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to 10V
Output Sustaining Voltage, V_CE(sus) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to +50V
Output Current, I_OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Input Current, I_IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10mA
Input Voltage, V_IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.5 to +30V
Clamp Diode Reverse Voltage, V_R . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50V
Clamp Diode Forward Current, I_F . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Common Terminal Current, I_COM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.0A
GND Terminal Current, I_GND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0A
Power Dissipation, P_D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7W
Operating Temperature Range, T_opr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +85°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C
Recommended Operating Conditions: (T_A = –40° to +85°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Supply Voltage
Output Sustaining Voltage
Output Current
V_CC
V_CE(sus)
I_OUT
4.5 – 5.5 V
0
– 50 V
0
– ^{1.25 V}
Input Voltage
V_IN
Clamp Diode Reverse Voltage
V_R
0
– 25 V
0
– 50 µA
Clamp Diode Forward Voltage
V_F
0
– 1.25 A
Power Dissipation
P_D
0
– 1.0 W