NTE1914 Datasheet, PDF (1/2 Pages) NTE Electronics – 3 Terminal Positive Voltage Regulator 12V, 1A

NTE1914
3 Terminal Positive Voltage Regulator
12V, 1A
Description:
The NTE1914 is a positive 3–terminal voltage regulator in a TO3 type package suitable for numerous
applications requiring up to 1A. One of these is local on card regulation, eliminating the distribution
problems associated with single point regulation. Other applications include; logic systems, instru-
mentation, HiFi, and other solid state lectronic equipment. Although designed primarily as a fixed volt-
age regulator, the NTE1914 can be used with external components to obtain adjustable voltages and
currents.
Features:
D Output Current in Excess of 1A
D Internal Thermal Overload Protection
D No External Components Required
D Output Transistor Safe Area Protection
D Internal Short Circuit Current Limit
Absolute Maximum Ratings:
Input Voltage , V_IN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35V
Power Dissipation (Note 1), P_D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Internally Limited
Maximum Junction Temperature, T_J . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150°C
Operating Junction Temperature Range, T_A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0° to +70°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Lead Temperature (During Soldering, 10 sec), T_L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +300°C
Note 1. Thermal resistance is typically +4°C/W junction–to–case and +35°C/W junction–to–ambient.
Electrical Characteristics: (0° ≤ T_J ≤ +125°C, V_O = 12V, V_IN = 19V, Note 2 unless otherwise
specified)
Parameter
Output Voltage
Symbol
Test Conditions
V_O T_A = +25°C, 5mA ≤ I_O ≤ 1A
5mA ≤ I_O ≤ 1A, 14.5V ≤ V_IN ≤ 27V, P ≤ 15W
Min Typ Max Unit
11.5 12.0 12.5 V
11.4 12.0 12.6 V
Note 2. All characteristics are measured with a 0.22µF capacitor across the input and a 0.1µF capac-
itor across the output. All characteristics except noise voltage and ripple rejection ratio are
measured using pulse tecniques (t_w ≤ 10ms, duty cycle ≤ 5%). Output voltage changes due
to changes in internal temperature must be taken into account separately.