English
Language : 

NTE1758 Datasheet, PDF (1/3 Pages) NTE Electronics – Integrated Circuit CMOS, 27 Command TV Remote Control Transmitter
NTE1758
Integrated Circuit
CMOS, 27 Command TV Remote Control Transmitter
Description:
The NTE1758 is a CMOS integrated circuit in a 16–Lead DIP type package designed for controlling
the transmitter of remote control systems for TV sets, etc. By using this device in combination with
the NTE1759 receiver control IC, a direct channel control system can be obtained. When an infrared
emitting diode is used as a transmitter element, this system will be very stable against any interfer-
ence.
Features:
D Capable of Transmitting 27 Commands:
Channel 1–20
Channel UP/DOWN
Volume UP/DOWN
Mute ON/OFF
Power ON/OFF
Option (Note 1)
D Minimum Misoperation by Infrared Transmission
D Wide Operating Voltage Range: VCC = 2.2V to 7.2V
D Low Power Consumption: IDD = 1µA at KEY OFF Condition
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Supply Voltage, VDD – VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –0.3 to +8.0V
Input Voltage, VIN – VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.3 to VDD V
Output Current, IOH(REM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –10mA
Power Dissipation, PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 360mW
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +75°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40° to +125°C
Note 1. The NTE1759 is not able to decode this option code.
Electrical Characteristics: (TA = –20° to +75°C, VDD = 6V unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Supply Voltage
Supply Current
Input High Voltage
Input Low Voltage
Output High Voltage
Input Pulldown Current
VDD
IDD(OP) OSC = 455kHz
IDD(ST) OSC STOP, TA = +25°C
VIH(KI)
VIL(KI)
VOH(REM) IOL = –1.0mA
IIL(KI) VIN = VDD, TA = +25°C
2.2
6.0
7.2
V
–
0.3
1.0 mA
–
–
1.0 µA
0.7 VDD –
VDD
V
0
– 0.3 VDD V
VDD –1
–
VDD
V
–10
–
–100 µA