English
Language : 

NTE1495 Datasheet, PDF (1/3 Pages) NTE Electronics – Integrated Circuit AM RF Mixer, IF Amplifier
NTE1495
Integrated Circuit
AM RF Mixer, IF Amplifier
Description:
The NTE1495 is a monolithic integrated circuit in a 15−Lead Staggered SIP type package. This device
is suitable for use as an AM tuner in automotive radio receivers, specifically where compact mounting
is required and contains an RF amplifier, mixer, IF amplifier, and two types of AGC circuits.
Features:
D High Sensitivity
D Excellent Two−Signal Selectivity Characteristics which Permits Receiving any Weak Signal
Without Interference from the Next Strongest Signal
D Wide AGC Range Provided by Two AGC Circuits (Delay Type) Employed in the IF and RF
Stages, in Addition to the Ability to Withstand Large Input and to the Yeild of High S/N Ratio
Absolute Maximum Ratings: (TA = +25°C unless otherwise specified)
Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16V
Input Voltage, Vi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7VP−P
Power Dissipation (TA = +75°C), PD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 310mW
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −20° to + 75°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +125°C
Recommended Operating Conditions: (TA = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Operating Supply Voltage
VCC
Operating Ambient Temperature
TA
9 13 16 V
−20 − +75 °C
Electrical Characteristics: (TA = +25°C, VCC = 13V, f = 1MHz, fmod = 400Hz, MOD = 30%,
RL = 10kΩ unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Circuit Current
Maximum Sensitivity
Signal−to−Noise Ratio
Detector Output
Total Tarmonic Distortion
ICC At No Signal
18 26 34 mA
MS Input level (υi) at which detector −
output υo gets 20mVrms
10 17 dBµV
S/N υi = 24dBµV
15 20 − dB
υO υi = 74dBµV
40 60 90 mVrms
THD υi = 126dBµV
− 0.4 3.0 %