NTE1206 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder

NTE1206
Integrated Circuit
Phase Lock Loop (PLL) Stereo Decoder
Features:
D Requires No Inductors
D Low External Part Count
D Only Oscillator Frequency Adjustment Necessary
D Integral Stereo/Monaural Switch 75mA Lamp Driving Capability
D Wide Dynamic Range: Typically up to 1.3V(RMS) Composite Input Signal
D Wide Supply Voltage: 8V to 16V
D Excellent Channel Separation Maintained Over Entire Audio Frequency Range
D Low Distortion: Typically 0.15% THD at 560mV_(RMS) Composite Input Signal
D Excellent SCA Rejection
Absolute Maximum Ratings: (T_A = +25°C unless otherwise specified)
Supply Voltage, V_CC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16V
Lamp Voltage, V_LAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
Lamp Current, (Note 1), I_LAMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75mA
Power Dissipation, P_D . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 625mW
Derated Above 25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mW/°C
Operating Temperature Range, T_opr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –25° to +75°C
Storage Temperature Range, T_stg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +150°C
Note 1. Not exceed indicator lamp current 60mA when used at V_CC = 14V to 16V.
Electrical Characteristics: (V_CC = 12V, f_M = 1kHz, T_A = +25°C unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Supply Voltage
Current Drain
Max. Comp. Input Voltage
V_CC
I_CC
V_IN Max
(Stereo)
At Lamp OFF
THD = 0.5%, L + R = 90%, P = 10%
8 12 16 V
– 13 – mA
– 1.3 – V
Max. Mono Input Voltage
V_IN Max THD = 1%, f = 1kHz
(Stereo)
– 1.3 – V
Input Resistance
R_IN
– 50 – kΩ