|
NTE1116 Datasheet, PDF (1/2 Pages) NTE Electronics – Integrated Circuit Audio Power Amplifier, 5W | |||
|
NTE1116
Integrated Circuit
Audio Power Amplifier, 5W
Description:
The NTE1116 is a monolithic integrated circuit designed for use as a low frequency class B amplifier.
The external cooling tabs enable 2.5 watts of output power to be achieved without the use of an exter-
nal heat sink and 5 watts of output power using a small area of the P.C. board copper as a heat sink.
Absolute Maximum Ratings:
Supply Voltage, VS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30V
Output Peak Current (NonâRepetitive), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2A
Output Current (Repetitive), IO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5A
Power Dissipation, Ptot
TA = +70°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1W
Ttab = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5W
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â40° to +150°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . â40° to +150°C
Thermal Resistance, JunctionâtoâTab, RthJâTAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12°C/W
Thermal Resistance, JunctionâtoâAmbient (Note 1), RthJA . . . . . . . . . . . . . . . . . . . . . . . . . . . 70°C/W
Note 1. Obtained with tabs soldered to printed circuit with minimized copper area.
Elecrtrical Characteristics: (TA = +25°C, VS = 24V, RL = 16⦠unless otherwise specified)
Parameter
Symbol
Test Conditions
Min Typ Max Unit
Quiescent Output Voltage (Pin12) VO
11 12 13 V
Quiescent Drain Current
Input Bias Current (Pin8)
Output Power
Input Saturation Voltage
Input Sensitivity
Input Resistance (Pin8)
Frequency Response (â3dB)
Id
Ib
PO
Vi(rms)
Vi
Ri
B
THD = 10%, f = 1kHz
PO = 5W, f = 1kHz
f = 1kHz
C3 = 330pF
â 9 20 mA
â 1 5 µA
4.4 5.0 â W
220 â â mV
â 80 â mV
â 5 â Mâ¦
40 to 20,000 Hz
Total Harmonic Distortion
Voltage Gain (Open Loop)
THD
GV
PO = 50mW to 2.5W, f = 1kHz
f = 1kHz
â 0.5 â %
â 80 â dB
Voltage Gain (Closed Loop)
GV f = 1kHz
39 42 45 dB
|
▷ |