NPR47M50 Datasheet, PDF (1/2 Pages) NTE Electronics – NON−POLAR ALUMINUM ELECTROLYTIC

NON−POLAR ALUMINUM ELECTROLYTIC
NPR, NPA (Non−Polarized) SERIES
SUBMINIATURE N0N−POLARIZED
(NPR: Radial Leads, NPA: Axial Leads)
The NPR and NPA Series subminiature aluminum electrolytic
capacitors are especially designed for use in circuits whose po-
larity is reversed or unknown or in crossover networks which do
not require tough characteristic requirements.
RATINGS
Capacitance Range: 0.47μf to 1000μf
Tolerance: ±20%
Voltage Range: 16V to 100V
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
−40°C to +85°C (−40°F to +185°F)
Leakage Current: I ≤ 0.002CV + 3μA (measured after
5 minutes of applied voltage)
I = Leakage Current (μA)
C = Nominal Capacitance (μf)
V = Rated Voltage (V)
Capacitance Tolerance (M): ±20%
measured at 20°C (68°F), 120Hz
Dissipation Factor: measured at +20°C (+68°F),120H_Z
Rated Voltage
16
25
50
63
100
0.1μf to 1000μf
0.16 0.12 0.08 0.06 0.06
Impedance Ratio at Low Temperature: 120H_Z
Comparison Z WV 16
25
50
63
100
Z @ −25°C (−13°F)/
Z @ +20°C (+68°F)
2
1.5
1.5
2
2
Z @ −40°C (−40°F)/
Z @ +20°C (+68°F)
3
2
2
4
4
Surge Voltage:
DC Rated Voltage
16
25
50
63
100
Surge Voltage
20
32
63
79
125
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL−STD 202, Method 208
Marking:
Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode
identification, vendor identification.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petroleum
ether, propanol and/or commercial detergents. Halo-
genated hydrocarbon cleaning agents such as Freon
(MF, TF, or TC), trichloroethylene, trichloroethane, or
methylchloride are not recommended as they may
damage the capacitor.
CASE SIZES AND DIMENSIONS:
NPR SERIES
Insulating
Sleeve
18.0 Min
dØ
A ±0.5
L
L’
5.0 Min
DØ
D’ Ø
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
NPA SERIES
L
dØ
Insulating
Sleeve
Load Life: 1000 ±12Hrs @ +85°C (+185°F),
at rated voltage
Leakage Current: Within values specified above
Dissipation Factor: Within ±150% of specified value
Capacitance Change Max: ±15% of initial value
Rated Voltage
160V to 450V
Capacitance Change Max
Within 30% of the initial value
2.3 Max
35.0 Min
L’
35.0 Min
DØ
D’ Ø
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
Shelf Life: 1000 Hrs @ +85°C (+185°F),
no voltage applied
Leakage Current: Within values specified above
ORDERING INFORMATION
Dissipation Factor: Within ±150% of specified value
NPR 47
M
50
Capacitance Change Max: Within ±15% of initial value
Series
Capacitance
Tolerance
Voltage
NTE Electronics, Inc. D Voice (973) 748−5089 D FAX (973) 748−6224 D http://www.nteinc.com
7