NEVH47M160 Datasheet, PDF (1/2 Pages) NTE Electronics – ALUMINUM ELECTROLYTIC 160V to 450V

ALUMINUM ELECTROLYTIC 160V to 450V
NEVH, NEHH SERIES
SUBMINIATURE HIGH VOLTAGE
(NEVH: Radial Lead, NEHH: Axial Leads)
The NEVH and NEHH series subminiature aluminum electrolytic
capacitors are ideal for polarized capacitor applications requiring
small size, high capacitance, high voltage, low cost, and depend-
ability over broad temperature ranges.
RATINGS
Capacitance Range: 1.0µf to 470µf
Tolerance: - 10%, +75%
Voltage Range: 160V to 450V
PERFORMANCE SPECIFICATIONS
Operating Temperature Range:
• For 160V and 250V:
- 40°C to +85°C ( - 40°F to +185°F)
• For 350V and 450V:
- 25°C to +85°C ( - 13°F to +185°F)
Leakage Current: I ≤ 0.02CV + 100µA (measured after
3 minutes of applied voltage)
I = Leakage Current (µA)
C = Nominal Capacitance (µf)
V = Rated Voltage (V)
Capacitance Tolerance (M): at +20°C (+68°F), 120H_Z
Capacitance Values through 4.7µf - 10% to +75%
Capacitance Values above 4.7µf - 10% to +50%
Dissipation Factor: at +20°C (+68°F),120H_Z
Rated Voltage
160, 250, and 350
450
1.0µf to 470µf
0.20
0.25
Impedance Ratio at Low Temperature: 120H_Z
Comparison Z WV 160 - 250
350
450
Z @ - 25°C ( - 13°F)/
Z @ +20°C (+68°F)
2
2
2
Z @ - 40°C ( - 40°F)/
Z @ +20°C (+68°F)
4
-
-
Surge Voltage:
DC Rated Voltage
160
250
350
450
Surge Voltage
200
300
400
500
Load Life: 1000 ±12Hrs @ +85°C (+185°F),
at rated voltage
Leakage Current: Within values specified above
Dissipation Factor: Within ±200% of specified value
Capacitance Change Max: See Table
MECHANICAL SPECIFICATIONS
Lead Solderability:
Meets the requirements of MIL - STD 202, Method 208
Marking:
Consists of series type, nominal capacitance, rated
voltage, temperature range, anode and/or cathode
identification, vendor identification.
Recommended Cleaning Solvents:
Methanol, isopropanol ethanol, isobutanol, petroleum
ether, propanol and/or commercial detergents. Halo-
genated hydrocarbon cleaning agents such as Freon
(MF, TF, or TC), trichloroethylene, trichloroethane, or
methylchloride are not recommended as they may
damage the capacitor.
CASE SIZE AND DIMENSIONS:
NEVH SERIES
Insulating
Sleeve
18.0 Min
dØ
A ±0.5

L
DØ
L’
5.0 Min
D’ Ø
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
NEHH SERIES (Insulating Bar = Negative)
dØ

L
Insulating
Sleeve
2.3 Max
35.0 Min
L’
35.0 Min
DØ
D’ Ø
D’ Ø = D Ø + 0.5 Max L’ = L + 1.0 Max at D Ø ≤ 8.0 L’ = L + 2.0 Max at D Ø ≥ 10.0
Rated Voltage
Capacitance Change Max
160V to 450V
Within 20% of the initial value
Shelf Life: 1000 Hrs @ +85°C (+185°F),
ORDERING INFORMATION
no voltage applied
Leakage Current: Within ±200% of specified value
NEVH 47
M
160
Dissipation Factor: Within ±150% of specified value
Series
Capacitance Change Max: Within ±20% of initial value
Capacitance
Tolerance
Voltage
NTE Electronics, Inc. D Voice (800) 631 - 1250 (973) 748 - 5089 D FAX (973) 748 - 6224 D http://www.nteinc.com
5