LP2956 Datasheet, PDF (9/16 Pages) National Semiconductor (TI) – Dual Micropower Low-Dropout Voltage Regulators

Typical Performance Characteristics Unless otherwise specified: V_IN = 6V, C_L = 2.2 µF (Main
Output) and 10 µF (Auxiliary Output), Feedback is tied to 5V Tap pin, C_IN = 1 µF, V_SD = 0V, Main Output pin is tied to Output
Sense pin, Auxiliary Output is programmed for 5V. The main regulator output has a 1 mA load, the auxiliary output has a
100 µA load. (Continued)
Line Transient Response
(Auxiliary Regulator)
Load Transient Response
(Auxiliary Regulator)
Load Transient Response
(Auxiliary Regulator)
DS011339-45
Ripple Rejection
(Auxiliary Regulator)
Output Impedance
(Auxiliary Regulator)
DS011339-46
Output Noise Voltage
(Auxiliary Regulator)
DS011339-47
DS011339-48
Auxiliary Comparator
Sink Current
DS011339-49
Error Output Voltage
DS011339-50
Dropout Detection Comparator
Threshold Voltages
DS011339-51
DS011339-52
DS011339-53
9
www.national.com