LM3814 Datasheet, PDF (8/14 Pages) National Semiconductor (TI) – Fast Current Gauge IC with Ultra Low Loss Sense Element and PWM Output

Typical Application Circuits In the application circuits, the 0.1µF ceramic capacitor between pins 1 and 8
is used for bypassing, and the 0.1µF ceramic capacitor between pins 3 and 4 is used for filtering. Shutdown (SD) is tied to
VDD through a 10kΩ resistor. (Continued)
FIGURE 3. Paralleling LM3814 for Higher Load Current
I_TOTAL = 2.2(D₁−0.5)I_MAX + 2.2(D₂−0.5)I_MAX
where D₁ is the duty cycle of PWM1 and D₂ is the duty cycle of PWM2.
Please refer to the Product Operation section for more information.
DS101013-7
DS101013-8
FIGURE 4. High Voltage Operation — V_IN Greater Than 5.25V (High Side Sense)
(PWM output is referred to Pin 7)
www.national.com
8