MN54AC258-X Datasheet, PDF (7/7 Pages) National Semiconductor (TI) – Quad 2 Input Multiplexer With TRI - STATE Outputs

MN54AC258-X REV 1B0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC PARAMETERS(Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TRISE=3.0ns, TFALL=3.0ns, Temp Range: -55C to 125C. NOTE: -55C TEMPERATURE,
SUBGROUP 11 IS GUARANTEED BUT NOT TESTED.
SYMBOL
tpZH(2)
PARAMETER
Output Enable
Time
VCC=3.0V
CONDITIONS
NOTES
PIN-
NAME
3, 4 OE to
Zn
MIN
1.0
MAX
9.50
UNIT
ns
SUB-
GROUPS
9
3, 4 OE to 1.0
Zn
11.5 ns 10, 11
tpZL(2)
Output Enable
Time
VCC=3.0V
3, 4 OE to 1.0
Zn
9.00 ns 9
3, 4 OE to 1.0
Zn
10.5 ns 10, 11
tpHZ(2)
Output Disable
Time
VCC=3.0V
3, 4 OE to 1.0
Zn
10.0 ns 9
3, 4 OE to 1.0
Zn
11.5 ns 10, 11
tpLZ(2)
Output Disable
Time
VCC=3.0V
3, 4 OE to 1.0
Zn
9.00 ns 9
3, 4 OE to 1.0
Zn
10.5 ns 10, 11
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &
8.
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C, TEMPERATURE,
SUBGROUPS A1, 2, 7, & 8.
SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY, SUBGROUP A9.
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A9 & 10.
TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2MSEC DURATION MAX.
+25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS.
7