MJLM108A-X Datasheet, PDF (7/19 Pages) National Semiconductor (TI) – OPERATIONAL AMPLIFIERS (SINGLE)

MJLM108A-X REV 2A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS: DRIFT VALUES
(The following conditions apply to all the following parameters, unless otherwise specified.)
DC: +Vcc = +20V, Vcm = 0V, Rs = 50 Ohms. "Delta calculations performed on JAN S and QMLV devices at group
B, subgroup 5 only".
SYMBOL
PARAMETER
CONDITIONS
Vio
+Iib
-Iib
Input Offset
Voltage
Input Bias
Current
Input Bias
Current
Note 1:
Note 2:
Note 3:
Note 4:
Calculated parameter.
Test on either A360, J273 AC or bench test.
Datalog reading in K = V/mV.
Bench test.
NOTES
PIN-
NAME
MIN
-0.25
MAX
0.25
UNIT
mV
SUB-
GROUPS
1
-0.5 0.5
nA 1
-0.5 0.5
nA 1
7