English
Language : 

THS4531 Datasheet, PDF (6/55 Pages) Texas Instruments – Ultra Low Power, Rail-to-Rail Output, Fully-Differential Amplifier
THS4531
SLOS358B – SEPTEMBER 2011 – REVISED MARCH 2012
www.ti.com
ELECTRICAL CHARACTERISTICS: VS = 5 V
Test conditions at TA = +25°C, VS+ = 5 V, VS– = 0 V, VOCM = open, VOUT = 2 VPP, RF = 2 kΩ, RL = 2 kΩ differential, G = 1 V/V,
single-ended input, differential output, and input and output referenced to mid-supply, unless otherwise noted.
PARAMETER
CONDITIONS
MIN
TYP
MAX
UNITS
TEST
LEVEL (1)
AC PERFORMANCE
Small-signal bandwidth
Gain-bandwidth product
Large-signal bandwidth
Bandwidth for 0.1-dB flatness
Slew rate, rise/fall, 25% to 75%
VOUT = 100 mVPP, G = 1
VOUT = 100 mVPP, G = 2
VOUT = 100 mVPP, G = 5
VOUT = 100 mVPP, G = 10
VOUT = 100 mVPP, G = 10
VOUT = 2 VPP, G = 1
VOUT = 2 VPP, G = 1
36
17
6
2.7
27
36
15
220/390
MHz
MHz
MHz
MHz
V/µs
Rise/fall time, 10% to 90%
4.6/5.6
ns
Settling time to 1%, rise/fall
Settling time to 0.1%, rise/fall
VOUT = 2 VStep
25/20
ns
60/60
ns
Settling time to 0.01%, rise/fall
150/110
ns
Overshoot/undershoot, rise/fall
1/1
%
2nd-order harmonic distortion
f = 1 kHz, VOUT = 1 VRMS
f = 10 kHz
–122
–128
C
dBc
f = 1 MHz
–60
3rd-order harmonic distortion
f = 1 kHz, VOUT = 1 VRMS
f = 10 kHz
–130
–137
dBc
f = 1 MHz
–71
2nd-order intermodulation distortion f = 1 MHz, 200-kHz tone spacing,
3rd-order intermodulation distortion VOUT envelope = 2 VPP
–85
dBc
–83
Input voltage noise
f = 1 kHz
10
nV/√Hz
Voltage noise 1/f corner frequency
45
Hz
Input current noise
f = 100 kHz
0.25
pA/√Hz
Current noise 1/f corner frequency
6.5
kHz
Overdrive recovery time
Overdrive = 0.5 V
65
ns
Output balance error
Closed-loop output impedance
VOUT = 100 mV, f = 1 MHz
f = 1 MHz (differential)
–67
dB
2.5
Ω
(1) Test levels (all values set by characterization and simulation): (A) 100% tested at +25°C; over temperature limits by characterization and
simulation. (B) Not tested in production; limits set by characterization and simulation. (C) Typical value only for information.
6
Submit Documentation Feedback
Product Folder Link(s): THS4531
Copyright © 2011–2012, Texas Instruments Incorporated