MN54AC14-X Datasheet, PDF (6/7 Pages) National Semiconductor (TI) – Hex Inverter Schmidt Trigger

MN54AC14-X REV 2A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC PARAMETERS
(The following conditions apply to all the following parameters, unless otherwise specified.)
AC: CL=50pf, RL=500 OHMS, TRISE & TFALL=3ns, Temp Range: -55C to +125C. NOTE: -55C TEMPERATURE, SUBGROUP
11 IS GUARANTEED BUT NOT TESTED.
SYMBOL
tpLH(1)
PARAMETER
Propagation Delay VCC=4.0V
CONDITIONS
NOTES
PIN-
NAME
MIN
3, In to O 1.5
4, 6
MAX
10.0
UNIT
ns
SUB-
GROUPS
9
3, In to O 1.5
4, 6
12.0 ns 10, 11
tpHL(1)
Propagation Delay VCC=4.0V
3, In to O 1.5
8.5
ns 9
4, 6
3, In to O 1.5
4, 6
10.0 ns 10, 11
tpLH(2)
Propagation Delay VCC=3.0V
3, In to O 1.0
4, 6
13.5 ns 9
3, In to O 1.0
4, 6
16.0 ns 10, 11
tpHL(2)
Propagation Delay VCC=3.0V
3, In to O 1.0
4, 6
11.5 ns 9
3, In to O 1.0
4, 6
14.0 ns 10, 11
Note 1:
Note 2:
Note 3:
Note 4:
Note 5:
Note 6:
Note 7:
SCREEN TESTED 100% ON EACH DEVICE AT +25C & +125C TEMPERATURE, SUBGROUPS 1, 2, 7, &
8.
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A1, 2, 7, & 8.
SCREEN TESTED 100% ON EACH DEVICE AT +25C TEMPERATURE ONLY SUBGROUP A9.
SAMPLE TESTED (METHOD 5005, TABLE 1) ON EACH MFG. LOT AT +25C & +125C TEMPERATURE,
SUBGROUPS A9 & 10.
TRANSMISSION LINE DRIVING TEST, GUARDBAND LIMITS SET FOR +25C, 2 MSEC DURATION MAX.
+25C & +125C MIN LIMITS GUARANTEED FOR 5.5V BY GUARDBANDING 4.5V MIN. LIMITS.
VHYS IS NOT MEASURED BUT CALCULATED USING VHYS=VTP-VTM.
6