LME49810 Datasheet, PDF (6/22 Pages) National Semiconductor (TI) – 200V Audio Power Amplifier Driver with Baker Clamp

Note 1: All voltages are measured with respect to the GND pin unless otherwise specified.
Note 2: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
functional but do not guarantee specific performance limits. Electrical Characteristics state DC and AC electrical specifications under particular test conditions
which guarantee specific performance limits. This assumes that the device is within the Operating Ratings. Specifications are not guaranteed for parameters
where no limit is given, however, the typical value is a good indication of device performance.
Note 3: The maximum power dissipation must be derated at elevated temperatures and is dictated by T_JMAX, θ_JC, and the ambient temperature, T_A. The maximum
allowable power dissipation is P_DMAX = (T_JMAX - T_A) / θ_JC or the number given in Absolute Maximum Ratings, whichever is lower. For the LME49810, T_JMAX = 150°
C and the typical θ_JC is 4°C/W. Refer to the Thermal Considerations section for more information.
Note 4: Human body model, 100pF discharged through a 1.5kΩ resistor.
Note 5: Machine Model, 220pF - 240pF discharged through all pins.
Note 6: Typicals are measured at +25°C and represent the parametric norm.
Note 7: Limits are guaranteed to National's AOQL (Average Outgoing Quality Level).
Note 8: Datasheet min/max specification limits are guaranteed by design, test, or statistical analysis.
Note 9: The maximum operating junction temperature is 150°C.
Note 10: Data taken with Bandwidth = 30kHz, A_V = 29dB, C_C = 10pF, and T_A = 25°C except where specified.
www.national.com
6