LMC660 Datasheet, PDF (5/14 Pages) National Semiconductor (TI) – CMOS Quad Operational Amplifier

AC Electrical Characteristics (Continued)
Unless otherwise specified, all
= 0V, V_CM = 1.5V, V_O = 2.5V
limits guaranteed for
and R_L > 1M unless
T_J = 25˚C. Boldface
otherwise specified.
limits
apply
at
the
temperature
extremes.
V⁺
=
5V,
V^−
Parameter
Conditions
Typ
LMC660AMD LMC660AI LMC660C LMC660E
(Note 4) _{LMC660AMJ/883}
Units
Limit
Limit
Limit
Limit
(Notes 4, 9)
(Note 4) (Note 4) (Note 4)
Total Harmonic Distortion
F = 10 kHz,
0.01
%
A_V = −10
R_L = 2 kΩ,
V_O = 8 V_PP
V⁺ = 15V
Note 1: Applies to both single supply and split supply operation. Continuous short circuit operation at elevated ambient temperature and/or multiple Op Amp shorts
can result in exceeding the maximum allowed junction temperature of 150˚C. Output currents in excess of ±30 mA over long term may adversely affect reliability.
Note 2: The maximum power dissipation is a function of T_J(max), θ_JA, and T_A. The maximum allowable power dissipation at any ambient temperature is P_D = (T_J(max)
− T_A)/θ_JA.
Note 3: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is in-
tended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The
guaranteed specifications apply only for the test conditions listed.
Note 4: Typical values represent the most likely parametric norm. Limits are guaranteed by testing or correlation.
Note 5: V⁺ = 15V, V_CM = 7.5V and R_L connected to 7.5V. For Sourcing tests, 7.5V ≤ V_O ≤ 11.5V. For Sinking tests, 2.5V ≤ V_O ≤ 7.5V.
Note 6: V⁺ = 15V. Connected as Voltage Follower with 10V step input. Number specified is the slower of the positive and negative slew rates.
Note 7: Input referred. V⁺ = 15V and R_L = 10 kΩ connected to V⁺/2. Each amp excited in turn with 1 kHz to produce V_O = 13 V_PP.
Note 8: Human body model, 1.5 kΩ in series with 100 pF.
Note 9: A military RETS electrical test specification is available on request. At the time of printing, the LMC660AMJ/883 RETS spec complied fully with the boldface
limits in this column. The LMC660AMJ/883 may also be procured to a Standard Military Drawing specification.
Note 10: For operating at elevated temperatures the device must be derated based on the thermal resistance θ_JA with P_D = (T_J − T_A)/θ_JA.
Note 11: All numbers apply for packages soldered directly into a PC board.
Note 12: Do not connect output to V⁺ when V⁺ is greater than 13V or reliability may be adversely affected.
Typical Performance Characteristics V_S = ±7.5V, T_A = 25˚C unless otherwise specified
Supply Current
vs Supply Voltage
Offset Voltage
Input Bias Current
DS008767-24
Output Characteristics
Current Sinking
DS008767-25
Output Characteristics
Current Sourcing
DS008767-26
Input Voltage Noise
vs Frequency
DS008767-27
DS008767-28
5
DS008767-29
www.national.com