DS90C402 Datasheet, PDF (5/8 Pages) National Semiconductor (TI) – Dual Low Voltage Differential Signaling (LVDS) Receiver

Ordering Information
Operating
Temperature
−40˚C to +85˚C
Package Type/
Number
SOP/M08A
Order Number
DS90C402M
RECEIVE MODE
R_IN+ − R_IN−
> +100 mV
< −100 mV
100 mV > & > −100 mV
R_OUT
H
L
X
H = Logic High Level
L = Logic Low level
X = Indeterminant State
Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The table of “Electrical Characteristics” specifies conditions of device operation.
Note 2: Current into device pins is defined as positive. Current out of device pins is defined as negative. All voltages are referenced to ground unless otherwise speci-
fied.
Note 3: All typicals are given for: V_CC = +5.0V, T_A = +25˚C.
Note 4: Generator waveform for all tests unless otherwise specified: f = 1 MHz, Z_O = 50Ω, t_r and t_f (0%–100%) ≤ 1 ns for R_IN.
Note 5: Channel-to-Channel Skew is defined as the difference between the propagation delay of one channel and that of the others on the same chip with an event
on the inputs.
Note 6: Chip to Chip Skew is defined as the difference between the minimum and maximum specified differential propagation delays.
Note 7: ESD Rating:
HBM (1.5 kΩ, 100 pF) ≥ 3,500V
EIAJ (0Ω, 200 pF) ≥ 250V
Note 8: Output short circuit current (I_OS) is specified as magnitude only, minus sign indicates direction only. Only one output should be shorted at a time, do not ex-
ceed maximum junction temperature specification.
Note 9: C_L includes probe and jig capacitance.
Typical Performance Characteristics
Output High Voltage vs
Power Supply Voltage
Output High Voltage vs
Ambient Temperature
DS100006-9
DS100006-10
5
www.national.com