English
Language : 

LP3947 Datasheet, PDF (4/14 Pages) National Semiconductor (TI) – USB/AC Adaptor, Single Cell Li-Ion Battery Charger IC
Absolute Maximum Ratings (Notes 1,
2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
CHG-IN
All pins except GND and CHG-IN
(Note 3)
Junction Temperature
Storage Temperature
Power Dissipation (Note 4)
ESD (Note 5)
Human Body Model
Machine Model
−0.3V to +6.5V
−0.3V to +6V
150˚C
−40˚C to +150˚C
1.89W
2 kV
200V
Operating Ratings (Notes 1, 2)
CHG-IN
EN, ISEL, MODE, SCL, SDA,
VT (Note 3)
Junction Temperature
Operating Temperature
Thermal Resistance θJA
Maximum Power Dissipation
(Note 6)
0.3V to 6.5V
0V to 6V
−40˚C to +125˚C
−40˚C to +85˚C
37˚C/W
1.21W
Electrical Characteristics
Unless otherwise noted, VCHG-IN = 5V, VBATT = 4V, CCHG-IN = 1 µF, CBATT = 10 µF. Typical values and limits appearing in nor-
mal type apply for TJ = 25˚C. Limits appearing in boldface type apply over the entire junction temperature range for operation,
TJ = −40˚C to +85˚C. (Notes 7, 8, 9)
Symbol
Parameter
Conditions
Limit
Typ
Units
Min
Max
VCC SUPPLY
VCHG-IN
Input Voltage Range
VUSB
ICC
Quiescent Current
VOK-TSHD Adaptor OK Trip Point (CHG-IN)
VUVLO-TSHD Under Voltage Lock-Out Trip Point
VOVLO-TSHD Over Voltage Lock-Out Trip Point
Thermal Shutdown Temperature
Thermal Shutdown Hysteresis
VCHG-IN ≤ 4V
EOC = Low, adaptor connected,
VBATT = 4.1V
VCHG-IN –VBATT (Rising)
VCHG-IN –VBATT (Falling)
VCHG-IN (Rising)
VCHG-IN (Falling)
VCHG-IN (Rising)
VCHG-IN (Falling)
(Note 8)
4.5
4.3
2
50
60
50
3.95
3.6
3.75
3.4
5.9
5.7
160
20
6
V
6
20
µA
150
mV
mV
4.3
V
4.1
V
V
˚C
BATTERY CHARGER
ICHG
Fast Charge Current Range
ISEL = High, In USB Mode
100
ISEL = Low, In USB Mode
500
mA
In AC Adaptor Mode
100
750
Fast Charge Current Accuracy
IPRE-CHG
IEOC
Pre-Charge Current
End of Charge Current Accuracy
ICHARGE = 100 mA or 150 mA
ICHARGE ≥ 200 mA
VBATT = 2V
100 mA to 450 mA, 0.1C EOC Only
(Note 10)
−20
+20
mA
−10
+10
%
45
70
mA
−10
+10
mA
500 mA to 750 mA, All EOC Points
−20
+20
%
VBATT
VCHG-Q
Battery Regulation Voltage (For 4.1V
Cell)
Battery Regulation Voltage (For 4.2V
Cell)
Full Charge Qualification Threshold
TJ = 0˚C to +85˚C
TJ = −40˚C to +85˚C
TJ = 0˚C to +85˚C
TJ = −40˚C to +85˚C
VBATT Rising, Transition from
Pre-Charge to Full Current
4.1 4.059
4.141
4.1 4.038
4.162
V
4.1 4.158
4.242
4.2 4.137
4.263
3.0
V
www.national.com
4