LMV551 Datasheet, PDF(4/12 Page) Texas Instruments – LMV551/LMV552/LMV554 3 MHz, Micropower RRO Amplifiers

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

LMV551 Datasheet, PDF (4/12 Pages) Texas Instruments – LMV551/LMV552/LMV554 3 MHz, Micropower RRO Amplifiers

◁

Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is

intended to be functional, but specific performance is not guaranteed. For guaranteed specifications and the test conditions, see the Electrical Characteristics

Tables.

Note 2: Human Body Model, applicable std. MIL-STD-883, Method 3015.7. Machine Model, applicable std. JESD22-A115-A (ESD MM std. of JEDEC)

Field-Induced Charge-Device Model, applicable std. JESD22-C101-C (ESD FICDM std. of JEDEC).

Note 3: The maximum power dissipation is a function of TJ(MAX), Î¸JA. The maximum allowable power dissipation at any ambient temperature is

PD = (TJ(MAX) - TA)/ Î¸JA. All numbers apply for packages soldered directly onto a PC board.

Note 4: Electrical Table values apply only for factory testing conditions at the temperature indicated. Factory testing conditions result in very limited self-heating

of the device such that TJ = TA. No guarantee of parametric performance is indicated in the electrical tables under conditions of internal self-heating where TJ >

TA.

Note 5: Typical values represent the most likely parametric norm as determined at the time of characterization. Actual typical values may vary over time and will

also depend on the application and configuration. The typical values are not tested and are not guaranteed on shipped production material.

Note 6: Limits are 100% production tested at 25Â°C. Limits over the operating temperature range are guaranteed through correlations using statistical quality

control (SQC) method.

Note 7: Positive current corresponds to current flowing into the device.

Note 8: Slew rate is the average of the rising and falling slew rates.

Note 9: The part is not short circuit protected and is not recommended for operation with heavy resistive loads.

Connection Diagrams

5-Pin SC70

8-Pin MSOP

Top View

20152602

Ordering Information

Package

5-Pin SC70

8-Pin MSOP

Part Number

LMV551MG

LMV551MGX

LMV552MM

LMV552MMX

Package Marking

A94

AH3A

Top View

20152611

Transport Media

1k Units Tape and Reel

3k Units Tape and Reel

1k Units Tape and Reel

3.5k Units Tape and Reel

NSC Drawing

MAA05A

MUA08A

www.national.com

▷