English
Language : 

LME49713 Datasheet, PDF (4/14 Pages) National Semiconductor (TI) – High Performance, High Fidelity Current Feedback Audio Operational Amplifier
Symbol
Parameter
Conditions
IOUT
IOUT-CC
ROUT
IS
Output Current
Instantaneous Short Circuit Current
Output Resistance
Total Quiescent Current
RL = 150Ω, VS = ±18V
fIN = 5MHz
Closed-Loop
Open-Loop
IOUT = 0mA
LME49713
Typical
Limit
(Note 6)
(Note 7)
±100
±93
±140
Units
(Limits)
mA (min)
mA
TBD
10
8
Ω
Ω
9.5
mA (max)
Note 1: “Absolute Maximum Ratings” indicate limits beyond which damage to the device may occur, including inoperability and degradation of device reliability
and/or performance. Functional operation of the device and/or non-degradation at the Absolute Maximum Ratings or other conditions beyond those indicated in
the Recommended Operating Conditions is not implied. The Recommended Operating Conditions indicate conditions at which the device is functional and the
device should not be operated beyond such conditions. All voltages are measured with respect to the ground pin, unless otherwise specified.
Note 2: The Electrical Characteristics tables list guaranteed specifications under the listed Recommended Operating Conditions except as otherwise modified
or specified by the Electrical Characteristics Conditions and/or Notes. Typical specifications are estimations only and are not guaranteed.
Note 3: Amplifier output connected to GND, any number of amplifiers within a package.
Note 4: Human body model, applicable std. JESD22-A114C.
Note 5: Machine model, applicable std. JESD22-A115-A.
Note 6: Typical values represent most likely parametric norms at TA = +25ºC, and at the Recommended Operation Conditions at the time of product
characterization and are not guaranteed.
Note 7: Datasheet min/max specification limits are guaranteed by test or statistical analysis.
Note 8: PSRR is measured as follows: VOS is measured at two supply voltages, ±5V and ±15V. PSRR = | 20log(ΔVOS/ΔVS) |.
www.national.com
4