|
ADC081500 Datasheet, PDF (4/28 Pages) National Semiconductor (TI) – High Performance, Low Power, 8-Bit, 1.5 GSPS A/D Converter | |||
|
◁ |
Pin Descriptions and Equivalent Circuits (Continued)
Pin Functions
Pin No.
Symbol
Equivalent Circuit
Description
11
VIN+
10
VINâ
7
VCMO
31
VBG
126
CalRun
32
REXT
Analog signal inputs to the ADC. The differential full-scale
input range is 650 mVP-P when the FSR pin is low, or 870
mVP-P when the FSR pin is high.
Common Mode Voltage. The voltage output at this pin is
required to be the common mode input voltage at VIN+ and
VINâ when d.c. coupling is used. This pin should be grounded
when a.c. coupling is used at the analog inputs. This pin is
capable of sourcing or sinking 100µA. See Section 2.2.
Bandgap output voltage capable of 100 µA source/sink.
Calibration Running indication. This pin is at a logic high when
calibration is running.
External bias resistor connection. Nominal value is 3.3k-Ohms
(±0.1%) to ground. See Section 1.1.1.
34
Tdiode_P
35
Tdiode_N
83
D7â
84
D7+
85
D6â
86
D6+
89
D5â
90
D5+
91
D4â
92
D4+
93
D3â
94
D3+
95
D2â
96
D2+
100
D1â
101
D1+
102
D0â
103
D0+
Temperature Diode Positive (Anode) and Negative (Cathode)
for die temperature measurements. See Section 2.6.2.
The LVDS Data Outputs that are not delayed in the output
demultiplexer. Compared with the Dd outputs, these outputs
represent the later time samples. These outputs should
always be terminated with a 100⦠differential resistor.
www.national.com
4
|
▷ |