MN54ACTQ574-X Datasheet, PDF (3/8 Pages) National Semiconductor (TI) – Octal D Flip-Flop with TRI-STATE Outputs

MN54ACTQ574-X REV 2A0
MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1)
Supply Voltage (Vcc)
DC Input Diode Current (Iik)
Vi = -0.5V
Vi = Vcc +0.5V
DC Input Voltage (Vi)
DC Output Diode Current (Iok)
Vo = -0.5V
Vo = Vcc +0.5V
DC Output Voltage (Vo)
DC Output Source or Sink Current (Io)
DC Vcc or Ground Current per Output Pin (Icc or Ignd)
Storage Temperature (Tstg)
DC Latch-Up Source or Sink Current
Junction Temperature (Tj)
CDIP
-0.5V to +7.0V
-20 mA
+20 mA
-0.5V to Vcc +0.5V
-20 mA
+20 mA
-0.5 to Vcc +0.5V
+50 mA
+50 mA
-65 C to + 150 C
+300 mA
175 C
Note 1:
Absolute maximum ratings are those values beyond which damage to the device may
occur. The databook specifications should be met, without exception, to ensure that
the system design is reliable over its power supply, temperature, and output/input
loading variables. National does not recommend operation of FACT TM circuits outside
databook specifications.
Recommended Operating Conditions
(Note 1)
Supply Voltage (Vcc)
Input Voltage (Vi)
Output Voltage (Vo)
Operating Temperature (Ta)
Minimum Input Edge Rate (Delta V/Delta t)
ACTQ Devices
Vin from 0.8V to 2.0V
Vcc @ 4.5V, 5.5V
4.5V to 5.5V
0V to Vcc
0V to Vcc
-55 C to + 125 C
125 mV/ns
Note 1: All commercial packaging is not recommended for applications requiring greater than
2000 temperature cycles from -40C to +125C.
3