English
Language : 

DS96F172M Datasheet, PDF (3/11 Pages) National Semiconductor (TI) – EIA-485/EIA-422 Quad Differential Drivers
COMMERCIAL
Switching Characteristics
VCC = 5.0V, TA = 25˚C
Symbol
Parameter
tDD
Differential Output Delay Time
tTD
Differential Output Transition Time
tPLH
Propagation Delay Time,
Low-to-High Level Output
tPHL
Propagation Delay Time,
High-to-Low Level Output
tZH
Output Enable Time to High Level
tZL
Output Enable Time to Low Level
tHZ
Output Disable Time from High Level
tLZ
Output Disable Time from Low Level
tLZL
Output Disable Time from Low Level
with Load Resistor to GND (Note 8)
tSKEW
Driver Output to Output
Conditions
RL = 60Ω, Figure 3
RL = 27Ω, Figure 4
RL = 110Ω, FIgure 4
RL = 110Ω, Figure 6
RL = 110Ω, Figure 5
RL = 110Ω, Figure 6
Figure 6
RL = 60Ω
Min
Typ
Max
Units
15
20
ns
15
22
ns
12
16
ns
12
16
ns
25
32
ns
25
32
ns
25
30
ns
20
25
ns
300
ns
1.0
4.0
ns
Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. They are not meant to imply that the devices
should be operated at these limits. The tables of “Electrical Characteristics” provide conditions for actual device operation.
Note 3: Unless otherwise specified min/max limits apply across the 0˚C to +70˚C range for the DS96F174C. All typicals are given for VCC = 5V and TA = 25˚C.
Note 4: All currents into the device pins are positive; all currents out of the device pins are negative. All voltages are reference to ground unless otherwise specified.
Note 5: ∆|VOD| and ∆|VOC| are the changes in magnitude of VOD and VOC respectively, that occur when the input is changed from a high level to a low level.
Note 6: In EIA-422A and EIA-485 standards, VOC, which is the average of the two output voltages with respect to ground, is called output offset voltage, VOS.
Note 7: Only one output at a time should be shorted.
Note 8: For more information see Application Bulletin, contact Product Marketing.
Order Number: DS96F174CJ
DS96F174CN
NS Package Number J16A or N16E
3
www.national.com