DS89C387TMEA Datasheet, PDF (3/12 Pages) National Semiconductor (TI) – DS89C387 Twelve Channel CMOS Differential Line Driver

Switching Characteristics (Note 4)
V_CC = 5V ±10%, t_r, t_f ≤ 6 ns (Figures 1, 2, 3, 4)
Symbol
Parameter
Conditions
Min
Typ
Max
Units
t_PLH, t_PHL
Propagation Delay
Input to Output
S1 Open
2
6
11
ns
Skew
(Note 8)
S1 Open
0
0.5
3
ns
t_TLH, t_THL
Differential Output Rise
And Fall Times
S1 Open
6
10
ns
t_PZH
Output Enable Time
S1 Closed
t_PZL
Output Enable Time
S1 Closed
t_PHZ
Output Disable Time (Note 9)
S1 Closed
t_PLZ
Output Disable Time (Note 9)
S1 Closed
C_PD
Power Dissipation
Capacitance (Note 10)
12
25
ns
13
26
ns
4
8
ns
6
12
ns
100
pF
C_IN
Input Capacitance
6
pF
Note 7: This is the current sourced when a high output is shorted to ground. Only one output at a time should be shorted.
Note 8: Skew is defined as the difference in propagation delays between complementary outputs at the crossing point.
Note 9: Output disable time is the delay from the control input being switched to the output transistors turning off. The actual disable times are less than indicated
due to the delay added by the RC time constant of the load.
Note 10: C_PD determines the no load dynamic power consumption, P_D = C_PD V²CC f + I_CC V_CC, and the no load dynamic current consumption, I_S = C_PD V_CC f +
I_CC.
Note 11: ESD Rating: HBM (1.5 kΩ, 100 pF)
Inputs ≥ 1500V
Outputs ≥ 1000V
EIAJ (0Ω, 200 pF)
All Pins ≥ 350V
3
www.national.com